Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
3,083 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,105 part numbers: Motion Control Products
 
  GLEASON
23,196 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,721 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,284 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,503 part numbers: Motor Mounted Brakes
  HUBBELL
16,198 part numbers: Electrical Control Products
  SUPERBOLT
119 part numbers: Fastening Solutions
  TELEMOTIVE
2,423 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
732 part numbers
 

Gemco Direct
Amazon Store

 
5,979 part numbers
 

Gleason Direct
Amazon Store

 
1,039 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.HubbellDirect.com Email: sales@HubbellDirect.com Phone: (888) 861-8777
 
Limit Switches
 
Euclid Power Limit Switch Type 4220
 
The EUCLID Power Limit Switch is a device well suited for crane hoist overtravel protection in repetitively worked applications and under severe environmental conditions. Maintenance requirements obviously will vary with service conditions. Even though the device has been carefully designed to minimize maintenance due to wear and adverse environmental conditions, a periodic inspection and maintenance program is mandatory in the interests of insuring maximum protection.
 
Specifications:
 
  •   Specifications 4220
  •   Instructions 4220
  •   Price List 4220, May 2013
 
 

4220 Euclid AC Power Limit Switches (w/o Weight and Cable)
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC71221005 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $4,174.92
2 HIC-HC81221005 Hubbell 4220 PWR LS SZ 2 AC LH w/o WEIGHT/CABLE - 0 $4,174.92
3 HIC-HC72531005 Hubbell 4220 PWR LS SZ 3 AC 2P N.C. R-H W/O W/C - 0 $4,657.75
4 HIC-HC81231005 Hubbell POWER LSW AC 2POLE LH SIZE 3 W/OUT CABLE - 0 $4,657.75
5 HIC-HC71251003 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $12,948.70
6 HIC-HC71221033 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $5,346.72
7 HIC-HC81221033 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $5,346.72
8 HIC-HC72531033 Hubbell 4220 PWR LS SZ3 RH W/O WEIGHT/CABLE - 0 $5,829.55
9 HIC-HC81231033 Hubbell PWR LIMSW AC 2POLE LH SZ 3 EBA W/O WGHT - 0 $5,829.55
10 HIC-HC71241033 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $9,213.20
11 HIC-HC71261033 Hubbell 4220 SZ6 AC 2P LIMIT SW R/H W/EBA - 0 $30,554.38
12 HIC-HC81261033 Hubbell 4220 SZ6 AC LIMIT SW L/H W/EARLY AUX 2P - 0 $30,554.38
13 HIC-HC71221301 Hubbell TYPE 4220 POWER LS, SZ2, TANDEM W/O WGHT - 0 $9,301.55
14 HIC-HC71221304 Hubbell TYPE 4220 POWER LS, SZ2, TANDEM W/O WGHT - 0 $11,645.15
15 HIC-HC71221001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $4,438.42
16 HIC-HC71241010 Hubbell POWER LS WITHOUT WEIGHT/CABLE 3POLE - 0 $10,487.30
17 HIC-HC81241010 Hubbell AC DC POWER SAFETY LS 4220 LEFT OPER. - 0 $10,487.30
18 HIC-HC71251010 Hubbell POWER LS W/O WEIGHT/CABLE, SIZE 5 3 POLE - 0 $15,731.72
4220 Euclid AC Power Limit Switches (w/ Weight and Cable), Use for both AC and DC Switches
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC71197001 Hubbell Weight & Cable 
Part HIC-71197001 
For 4220 Power Limit Switch 
Size 2 & 3 
aka Part HIC-HC71197001 
Ships in 10 Days or sooner 
[Amazon] 
Dated 6/17
- 0 $335.40
2 HIC-HC71197002 Hubbell Weight & Cable 
Part HIC-HC71197002 
For 4220 Power Limit Switch 
Size 4 
aka HC71197-102 
Ships in 37 Days or sooner 
Dated 6/17
- 0 $426.50
3 HIC-HC71197003 Hubbell Weight & Cable 
Part HIC-HC71197003 
For 4220 Power Limit Switch 
Size 5 
aka HC71197-103 
Ships in 30 Days or sooner 
Dated 6/17
- 0 $792.54
4 HIC-HC71197004 Hubbell Weight & Cable 
Part HIC-HC71197004 
For 4220 Power Limit Switch 
Size 6 
aka HC71197-104 
Ships in 25 Days or sooner 
Dated 6/17
- 0 $975.56
 

4220 DC Power Limit Switches (w/o Weight and Cable)
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC71221001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $4,438.42
2 HIC-HC81221001 Hubbell PWR LS SZ 2 AC, 2p NO/NC, LH [Lead time: 4-6 wks] - 0 $4,438.42
3 HIC-HC72531001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $5,375.40
4 HIC-HC81231001 Hubbell 4220 PWR LS SZ 3 LH 2P DC NC/NO w/o W/C - 0 $5,375.40
5 HIC-HC71241001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $8,686.20
6 HIC-HC81241001 Hubbell POWER LS 2P DC SIZE4 B-4220 LH NO WEIGHT - 0 $8,686.20
7 HIC-HC71251001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $14,632.77
8 HIC-HC81251001 Hubbell DC POWER LS, STANDARD 2P NC/NO SIZE 5 - 0 $14,632.77
9 HIC-HC71261001 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $36,975.25
10 HIC-HC81261001 Hubbell 4220 PWR LIM SW SZ 6 LH OP W/O WT/CABLE - 0 $36,975.25
11 HIC-HC71261003 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $40,193.05
12 HIC-HC71241032 Hubbell 4220 PWR LMT SW SZ4 E AUX 2P NC/NO RH - 0 $9,858.00
13 HIC-HC71251032 Hubbell 4220 PWR LMTSW SZ5 E AUX DC 2P NC/NO RH - 0 $15,804.58
14 HIC-HC71251031 Hubbell 4220 PWR LS SZ5 E AUX DC 2P SIL NC/NO RH - 0 $15,804.58
15 HIC-HC71251301 Hubbell POWER LS WITHOUT WEIGHT/CABLE - 0 $31,726.17
16 HIC-HC71261301 Hubbell 4220 LIMIT SWITCH SZ 6A NC TANDEM W/O WE - 0 $64,418.00
17 HIC-HC71261302 Hubbell 4220 LIMIT SWITCH SZ 6A NC TANDEM W/O WE - 0 $75,024.65
 

Type 3003 DC Limit Switches Resistors, 230-250 VDC, T.E.N.V. Enclosed
For Use with Dynamic Lowering Hoists

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC69453069 Hubbell SSRS-3 LIMIT STOP RESISTOR W/ 1TE-3 COVE - 0 $683.55
2 HIC-HC69453071 Hubbell RESISTOR, SSR LS, 14-26 HP - 0 $923.02
3 HIC-HC69453073 Hubbell RESISTOR, SSR LS, 34-45 HP - 0 $1,127.62
4 HIC-HC69453074 Hubbell RESISTOR, SSR LS, 46-65 HP - 0 $1,127.62
5 HIC-HC69453075 Hubbell RESISTOR, SSR LS, 66-100 HP - 0 $1,230.70
6 HIC-HC69453076 Hubbell RESISTOR, SSR LS, 101-135 HP - 0 $1,401.20
7 HIC-HC69453078 Hubbell RESISTOR, SSR LS, 201-265HP 230VDC - 0 $2,324.23
 

DC Power Limit Switch Contact Kits
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC59670001 Hubbell CONTACT KIT 4220 DC SZ 2 [Lead time: stock] - 0 $147.83
2 HIC-HC59670002 Hubbell CONTACT KIT 4220 DC SZ. 3 [Lead time: 3 wks] - 0 $1,565.19
3 HIC-HC59670003 Hubbell CONTACT KIT 4220 DC SZ. 4 [Lead time: 3 wks] - 0 $1,565.19
4 HIC-HC59670004 Hubbell CONTACT KIT 4220 DC SZ. 4 SILVER PWR LIM [Lead time: 3 wks] - 0 $4,444.99
5 HIC-HC59670005 Hubbell CONTACT KIT 4220 DC SZ. 5 [Lead time: 3 wks] - 0 $1,807.88
6 HIC-HC59670006 Hubbell CONTACT KIT 4220 DC SZ5 SILVER PWR LIMIT [Lead time: 6 wks] - 0 $2,047.40
7 HIC-HC59670007 Hubbell CONTACT KIT 4220 DC SZ. 6 [Lead time: 3 wks] - 0 $2,660.82
8 HIC-HC59670008 Hubbell CONTACT KIT FOR SIZE 6A LIMIT SWITCH [Lead time: 6 wks] - 0 $4,980.15
AC and DC Limit Switch Arc Shields (One Required Per Pole)
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC36242000 Hubbell ARC SHIELD ASSEMBLY FOR SZ 2 LIMIT SW [Lead time: 2 wks] - 0 $782.60
2 HIC-HC42562000 Hubbell ARC SHIELD ASSEMBLY FOR SZ 4 LIMIT SW [Lead time: 2 wks] - 0 $720.15
3 HIC-HC42563000 Hubbell ARCSHIELD ASSEMBLY FOR SZ5 LIMIT SW [Lead time: 2 wks] - 0 $981.80
4 HIC-HC32496000 Hubbell ARC SHIELD ASSEMBLY FOR SZ6, 6A LIMIT SW [Lead time: stock] - 0 $1,690.09
AC Power Limit Switch Contact Kits
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC59671101 Hubbell CONTACT KIT 4220 AC SZ. 2 [Lead time: 3 wks] - 0 $641.89
2 HIC-HC59671102 Hubbell CONTACT KIT 4220 AC SZ. 3 [Lead time: 2 wks] - 0 $782.60
3 HIC-HC59671103 Hubbell CONTACT KIT 4220 AC SZ. 4 [Lead time: 3 wks] - 0 $782.60
4 HIC-HC59671104 Hubbell 4220 CONTACT KIT SZ4 - SILVER -PWR LIMIT [Lead time: stock] - 0 $324.10
5 HIC-HC59671105 Hubbell CONTACT KIT 4220 AC SZ. 5 [Lead time: 3 wks] - 0 $903.54
6 HIC-HC59671106 Hubbell 4220 CONTACT KIT SZ5 - SILVER -PWR LIMIT [Lead time: stock] - 0 $1,051.36
7 HIC-HC59671107 Hubbell CONTACT KIT 4220 AC SZ. 6 [Lead time: 6 wks] - 0 $1,330.41
8 HIC-HC59671108 Hubbell 4220 CONTACT KIT SZ6A -cu -PWR LIMIT [Lead time: stock] - 0 $2,553.31
9 HIC-HC59671111 Hubbell 4220 CONTACT KIT SZ4 - STD 3P -PWR LIMIT [Lead time: stock] - 0 $221.34
10 HIC-HC59671112 Hubbell 4220 CONTACT KIT SZ4 -SILV 3P -PWR LIMIT [Lead time: stock] - 0 $474.30
11 HIC-HC59671113 Hubbell CONTACT KIT 4220 AC SZ 5 3POLE [Lead time: 3 wks] - 0 $1,358.07
12 HIC-HC59671114 Hubbell 4220 CONTACT KIT SZ5 -SILV -3P-PWR LIMIT [Lead time: stock] - 0 $1,565.19
Secure Online Order

 
Secure Online Order
 
16,198 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Hubbell part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Magnet Controls

Magnet Controls
 
   • 4215 Magnet Controller Lift/
     Drop Switches
   • 4291 Euclid Magnet Controllers
     Varistor Type
   • 4292 Compact Magnet
   • Controller YARDMASTER
   • 4292P Compact Magnet
     Controller YARDMASTER PUP
   • 4295 Euclid Magnet Controller
     Resistor Type Auto Discharge
   • 4296 Euclid Magnet Controller
     Resistor Type Manual
     Discharge
   • 4310 Lifting Magnet Disconnect
     Switch
   • 4320 Lifting Magnet Power
     Supplies
 
Hubbell Euclid Magnet Controllers utilize heavy duty components and circuitry arranged to provide optimum control of your lifting magnet. Full featured NEMA Type 1 or 3R enclosed magnet controllers are available for immediate shipment. Of course, we welcome inquiries for custom applications as well.
DC Devices

DC Devices
 
   • 42264 Type 264 400 AMP
     600 Volt DC Contactor
   • 42700 Type 700 1250 AMP
     1000 Volt DC Contactor
   • 42703 Type 703 5000 AMP
     1000 Volt DC Contactor
   • 42710 Type 710 700 AMP
     1500 Volt DC Contactor Dual
     Two Pole Switch
   • 42711 42712 Type 711/712
     1600 AMP 1500 Volt DC
     Motor Operated Switch
   • 42716 Type 716 1600 AMP
     1500 Volt DC Contactor
   • 42720 Type 720 200 AMP
     600 Volt DC Contactor
 
The latest addition to the Hubbell Industrial Controls family are DC Devices used in solid-state adjustable speed drives, uninterruptable power supplies, fuel cells, crane controls, transit and rail vehicles, gas and oil well drilling equipment, mining machinery, and more. These devices are ideal for a wide range of heavy duty applications.
 
Electronic Components

Electronic Components
 
   • 5330 Electronic Frequency
     Relay
   • 5350 Static In-Line Timer
   • 5360 Arc Suppressor
   • 5370 DC Electronic Overload
     Relay
 
The Bulletin 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection.
 
The Bulletin 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control.
 
The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.
 
The Bulletin 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.
Limit Switches

Limit Switches
 
   • 4220 Euclid Power Limit Switch
   • 4225 Quick Break Power Limit
     Switch
   • Series 54 Geared Rotary
     Limit Switch NEMA 1-12
   • Series 55 Geared Rotary Limit
     Switch NEMA 4, 7, 9
 
Type 4220: D-C Limit Switches are devices that are used to interrupt the main power circuit, setting up a dynamic braking circuit that quickly stops hook travel with a minimum of drift.
 
A-C Limit Switches are similar in construction to D-C Limit Switches. The difference is in operation. A-C Limit Switches disconnect two power lines to the hoist motor which then is stopped by a magnetic brake.
 
Type 4225: Euclid quick break limit switches for hoists are normally closed by the weight of the striking lever. The movement of the lever on its upward travel, when engaged by the hoist hook block on its upward travel, causes the switch to quickly break the circuit to the motor with very little upward movement of the crane hook. The switch is automatically reset by the weight of the striking lever when the hook is lowered.
 
AC/DC Contactors and Relays

AC/DC Contactors and Relays
 
   • 5110 AC Magnetic Contactor
   • 5210 DC Magnetic Contactor
   • 5247 Alternating Relay
   • 5320 Euclid DC Relay
 
Rugged Euclid contactors feature many unique design and engineering advancements that greatly simplify applications, installations and servicing. Over 65 years of experience in design as well as manufacturing has been incorporated into these highly reliable units.
 
DC Relays, Type 5320, general purpose control, voltage sensitive, current, and plugging relays are built to withstand severe service using the latest technology in materials for insulating and high-strength. They are recommended for use on heavy industry dc drives such as cranes and mill auxiliaries.
Master Switch/Drum Controllers

Master Switch/Drum Controllers
 
   • 4211 Mini-Master Switch
   • 4216 Cam Operated Master
     Switch
   • 4253 Class 53 Master Switch
   • 4258 Class 58 Drum Switch
 
Type 4211 Mini-Master: The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing. It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications.
 
Type 4216 Mill Master: These master switches are of rugged construction to withstand the rough service encountered on applications in the steel mills, such as crane, coal, and ore bridges, blooming and rolling mill auxiliaries, etc., where either floor or desk mounting is required.
 
Type 4253: Master Switches are used to provide single handle pilot control of hoists, cranes, oven pushers, car movers and other equipment requiring speed steps of wound rotor or direct current motors.
 
Type 4258: Drum Controllers start, stop and change the speed and/or rotating direction of reversible AC and DC electric motors.
 
Magnetic Drum Brakes

Magnetic Drum Brakes
 
   • Class 5010 Type F Magnetic
     Drum Brakes
   • Class 5060 Type AT Adjustable
     Torque Brakes
   • Class 5010 Brake Rectifier
   • Brake Shoes, Linings, Bolts
     and Pins
 
Class 5010 Type F: Magnetic drum brakes are spring set, electrically released, drum type friction brakes which are used with either AC or DC motors, used as holding brakes on DC series motor drives, crane hoists, mill drives, and transfer cars.
 
Class 5060 Type AT: Adjustable torque brakes are dual-purpose, drum-type friction brakes that combine an electrically released, spring-set holding brake with an electrically operated, adjustable torque stopping brake within one brake frame.
 
Class 5010 Brake Rectifier: Converts AC line power to DC for use with a rectifier operated brake. A high speed forcing circuit provides optimum operation of the brake.
LED Bridge Crane Lighting

LED Bridge Crane Lighting
 
LED Bridge Crane Lighting: The HBLC LED Highbay is specifically designed to be used on heavy industrial bridge cranes while utilizing AC or DC input voltage. Custom engineered LED optics provide evenly distributed light for bridge crane operators and others working under the crane for increased visibility and safety.
Pendant Pushbutton Stations

Pendant Pushbutton Stations
 
   • 2040 Euclid PBM Pendant
     Station
   • 2030 Compact Pendant Station
   • 2020 Euclid PBP Pendant
     Station
   • 2015, 2016, 2017 Euclid
     Pendant Station
   • 2001 Euclid HD Steel Pendant
     Station
   • PBC, WPBC and XPBC
     Replacement Parts
 
HD stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
 
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
Power Resistors

Power Resistors
 
   • SSR Type 3003 Power
     Resistor
   • SSR Type 3003 Power
     Resistor Frame
   • SSR Type 3003 Power
     Resistor Metal Cover
   • Euclid Type 3004 K Power
     Resistor
   • HHC Type 3005 Power
     Resistor
 
Hubbell Type SSR Power resistors from 1.3 amps through 101 amps are available, from unassembled to completely assembled in frames with covers. Standard assemblies are pre-engineered for primary or secondary resistance, and are used in typical applications such as motor starting or dynamic braking. Construction elements are stainless steel around a porcelain insulator, manufactured for endurance and reliability.
 
Heavy duty Types K1 and HHC resistors also utilize continuous stainless steel elements, with no weld joints where hot spots could develop. These resistors are available in ranges from 38 amps to 695 amps.
 
Pressure Switches

Pressure Switches
 
   • 4269ES 69ES Pressure Switch
     Water Systems
   • 4269W 69W Pressure Switch
     Water Systems
   • 4269J 69J Pressure Switch
     Air Systems
   • 4269H 69H Pressure Switch
     Air Systems
   • 4269SA 69 Pressure Switch
     Special Application
 
Hubbell pressure switches provide automatic control for air or water systems such as compressors, dry sprinkler systems, and well pumps or pumping systems. Thousands of variations are available to provide maximum flexibility at minimum cost.
Speed Switches

Speed Switches
 
   • 2200 Speed Switch Type PR
   • 2210 Speed Switch Type C
   • 2220 Speed Switch Type F
   • 2243 Speed Switch Type D
   • 2260 Speed Switch Type E
   • 2310 Speed Switch
     Non-contact
 
Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.
Radio Control Products

Radio Control Products
 
A typical radio remote control system consists of a portable transmitter carried by the operator, and a receiver installed on the crane, the locomotive, or other remote machinery. Each system operates on a licensed frequency in the 72 to 76 MHz or the 450 to 470 MHz bands, requiring the user to have an FCC license for the transmitter.
Disconnect Switches

Disconnect Switches
 
   • 4245 Euclid Manual-Magnetic
     Disconnect Switch
   • 4310 Lifting Magnet
     Disconnect Switch
   • 5140 Fused And Non-Fused
     Disconnect Switch
 
Type 4245: The Manual-Magnetic Disconnect Switches are combinations manually and magnetically operated contactors enclosed in a NEMA Type wall-mounted enclosure.
 
The contactors for the disconnect switches are the same as the contactors used on Euclid's crane and mill type magnetic controllers. Silver faced contacts are standard.
 
Type 5410: Fused Disconnect - Rated 30amp-200amp. UL Listed.
 
 
Line-Arc AC and DC Contactors

Line-Arc AC and DC Contactors
 
   • 7004 Type M Line-Arc DC
     Contactors
   • 8503 Type M Line-Arc AC
     Contactors
 
Class 7004 Type M Line-Arc® DC Contactors: Extremely rugged, mill duty DC contactors. Built of the highest-grade materials and tested to the toughest duty standards, Type M contactors feature the LINE-ARC method of arc extinction for the longer tip life. The Type M also features steel pan mounting and readily accessible power and control terminations.
 
Class 8503 Type M Line-Arc® AC Contactors: AC version of our Class 7004 Type M contactor. Ideally suited to control AC mill motors, these contactors are designed especially for heavy industry AC drives, such as cranes and mill auxiliaries. Furnished with a DC operating coil, rectifier blocks are available to supply power for several contactors.
 
Lifting Magnet Controllers

Lifting Magnet Controllers
 
  • Class 6815 Type A Lifting
    Magnet Controllers
 
  • Class 6815 Type M
    Magnet Controllers
 
  • Class 6815 Type MF Magnet
    Controllers with Fanning
    Control
 
  • Class 6815 Type MG1 Lever
    Lift-Drop Master Switch
Power Limit Switches

Youngstown Power Limit Switches
 
   • 6170 Youngstown Power
     Limit Switches for AC and
     DC Cranes
   • 6715 Tab-Weld Resistors
 
This OSHA-required switch limits crane hoist over-travel in the hoisting direction. It is operated by the crane hoist hook block and directly interrupts the hoist motor current. EC&M created the first power limit switches used on cranes to help provide the highest level of crane safety. Youngstowns feature an automatic gravity reset mechanism, sealed bearings, and right- or left-hand operating arms.
Replacement Parts

Replacement Parts and Modification Kits
 
   • DC Coil
   • Replacement Parts Kits
   • Type MX11 Electrical Interlocks
   • Type AI1 Arc Suppressor
   • Types MM1, MM2, MM3, MM4,
     MM5 Mechanical Interlocks
   • Types KX3, KX4, KX5 Contact
     Kits
   • Type ML1, ML2, ML3 Lug Kits
   • Types MT1, MT2, MT3, MT4,
     MT5 Tie Bar Kit
   • Pneumatic Timer Kit
   • Type K DC Relays
   • Type ST DC Static Timer
   • Type SSI DC Acceleration
     Module
   • 9055 Magnetic Current
     Overload Relays
 
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com   Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985