Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
3,092 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,113 part numbers: Motion Control Products
 
  GLEASON
23,199 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,727 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,285 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,505 part numbers: Motor Mounted Brakes
  HUBBELL
16,236 part numbers: Electrical Control Products
  SUPERBOLT
120 part numbers: Fastening Solutions
  TELEMOTIVE
2,423 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
733 part numbers
 

Gemco Direct
Amazon Store

 
5,982 part numbers
 

Gleason Direct
Amazon Store

 
1,041 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.HubbellDirect.com Email: sales@HubbellDirect.com Phone: (888) 861-8777
 
Electronic Components
 
The Bulletin 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection. The master relay can be used as a stand-alone relay. The slave unit must be used with the master unit and provides additional points of frequency detection.
 
The Bulletin 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control. The timing unit is a series control element having an adjustable timing range. Two units are available. One with a timing range of 0.5 to 3.0 seconds, another with a timing range of 2.5 to 16.0 seconds.
 
The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted. Utilization of the Bulletin 5360 Arc Suppressor may eliminate the use of an interposing relay.
 
The Bulletin 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.
 
Electronic Frequency Relay Type 5330
 
The Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection. The master relay can be used as a stand-alone relay. The slave unit must be used with the master unit and provides additional points of frequency detection.
 
Specifications:
 
  •   Specifications 5330
  •   Application Data 5330
  •   Price List 5330, October 2011
 

FREQUENCY SENSOR (WITH POWER SUPPLY)
Note: (Relay drops out when frequency falls below point)

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48746101 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
2 HIC-HC48746102 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
3 HIC-HC48746103 Hubbell Type 5330 Frequency Sensor  
Part HIC-HC48746103 
Frequency Sensor With Power Supply 
aka HC48746-103 
Ships in 4 Weeks Dated 4/17
- 0 $2,183.33
4 HIC-HC48746104 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
5 HIC-HC48746109 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
6 HIC-HC48746105 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
FREQUENCY SENSOR (WITH POWER SUPPLY)
Note: (Relay picks up when frequency falls below point)

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48746108 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
2 HIC-HC48746107 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
3 HIC-HC48746111 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
4 HIC-HC48746110 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
5 HIC-HC48746112 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
* FREQUENCY SENSOR (WITHOUT POWER SUPPLY)
Note: (Relay drops out when frequency falls below point)

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48751101 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
2 HIC-HC48751102 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
3 HIC-HC48751103 Hubbell Type 5330 Frequency Sensor  
Part HIC-HC48751103 
Frequency Sensor With Out the Power Supply 
Slave Unit 
aka HC48751-103 
Ships in 4 Weeks Dated 4/17
- 0 $1,475.44
4 HIC-HC48751104 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
5 HIC-HC48751105 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
6 HIC-HC48751106 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
* FREQUENCY SENSOR (WITHOUT POWER SUPPLY)
Note: (Relay picks up when frequency falls below point)

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48751108 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
2 HIC-HC48751107 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
3 HIC-HC48751111 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
4 HIC-HC48751110 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
5 HIC-HC48751112 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
ACCESSORY - FREQUENCY CALIBRATION UNIT
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48771101 Hubbell Type 5330 Frequency Calibration Unit [Lead time: 4-6 wks] - 0 $1,985.55

FREQUENCY SENSOR 5330, TYPICAL USES AND SETTINGS WHEN USED WITH 60HZ MOTORS
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48746105 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
2 HIC-HC48751103 Hubbell Type 5330 Frequency Sensor  
Part HIC-HC48751103 
Frequency Sensor With Out the Power Supply 
Slave Unit 
aka HC48751-103 
Ships in 4 Weeks Dated 4/17
- 0 $1,475.44
3 HIC-HC48751101 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
4 HIC-HC48746103 Hubbell Type 5330 Frequency Sensor  
Part HIC-HC48746103 
Frequency Sensor With Power Supply 
aka HC48746-103 
Ships in 4 Weeks Dated 4/17
- 0 $2,183.33
5 HIC-HC48751105 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
6 HIC-HC48746107 Hubbell Type 5330 Frequency Sensor w/Power Supply [Lead time: 4-6 wks] - 0 $2,098.70
7 HIC-HC48751107 Hubbell Type 5330 Frequency Sensor w/o Power Supply [Lead time: 4-6 wks] - 0 $1,418.25
 
Static In-Line Timer Type 5350
 
The Bulletin 5350 Static In-Line Timer is a solid state timing unit for ruse in AC or DC contactor and relay control.
 
The timing unit is a series control element having an adjustable timing range. Two units are available. On with a timing range of 0.5 to 3.0 seconds, another with a timing range of 2.5 to 16.0 seconds.
 
The transient protected solid state circuitry is molded into an impact resistant enclosure. The solid state timer will operate satisfactorily in a heavy industrial environment characterized by extremes in temperature, shock, vibration and electrical noise.
 
Specifications:
 
  •   Price List, Catalog 5350, May 2010
 


Hubbell 5350 Static In-Line Timer
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48424001 Hubbell Type 5350 Static In-Line Timer (.05-3.0s) [Lead time: 1-2 wks] - 0 $354.95
2 HIC-HC48424002 Hubbell Type 5350 Static In-Line Timer (2.5-16.0s) [Lead time: 1-2 wks] - 0 $354.95
3 HIC-HC48424003 Hubbell Type 5350 Static In-Line Timer (.08-.75s) [Lead time: 4-6 wks] - 0 $354.95
 
Arc Suppressor Type 5360
 
The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.
 
Utilization of the Bulletin 5360 Arc Suppressor may eliminate the use of an interposing relay.
 
Specifications:
 
  •   Price List, Catalog 5360, May 2010
 


Hubbell 5360 Arc Suppressor
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48422001 Hubbell Type 5360 Arc Supressor [Lead time: 1-2 wks] - 0 $283.65
 
Electronic Overload Relay Type 5370
 
The Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the Instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.
 
Features:
 
  •   Automatic Reset
  •   Instantaneous and Inverse Time in one (1) unit
  •   Green "Overload-on" indicator
  •   Yellow "Overload-Condition" indicator
  •   Negative or Positive Shunt applications
  •   Mill-Duty Design
  •   Double Break Contacts
  •   Selectable automatic or manual reset of the output relay
  •   Latched red "Overload-Trip" indicates for Inverse Time and Instantaneous conditions
  •   Manual reset of trip indicators
  •   Optional 250 VDC isolation supply for adjustable voltage applications
  •   Optional adapter for 100mv ammeter shunt applications
  •   Optional ammeter shunt isolation module
 
Specifications:
 
  •   Instructions 5370
  •   Specifications 5370
  •   DC Electronic Relays 5370
  •   Price List 5370, December 2010
 

Hubbell 5370 DC Electronic Overload Relay
Diagnostic Lights and Auto-Man Mode Selection

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48713102 Hubbell Type 5370 Overload Relay 
Part HIC-HC48713202 
Electronic Overload Relay 
With a Negative Shunt 
Ships in 35 Days or sooner 
[Amazon] 
(3LBS) H 4" L 6" W 4" Box
- 0 $2,419.55
2 HIC-HC48713202 Hubbell Type 5370 Overload Relay 
Part HIC-HC48713202 
Electronic Overload Relay 
With a Positive Shunt 
Ships in 30 Days or sooner 
[Amazon] Dated 4/17 
(3LBS) H 4" L 6" W 4" Box
0 $2,545.58
Hubbell 5370 DC Electronic Overload Relay
Accessory Units

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC48732101 Hubbell Type 5370 250vdc Isolation Power Supply [Lead time: 4-6 wks] - 0 $680.45
2 HIC-HC48742101 Hubbell Type 5370 Adapter for 100mv Ammeter Shunt [Lead time: 4-6 wks] - 0 $113.15
3 HIC-HC48764101 Hubbell Type 5370 Negative Shunt Isolation Module [Lead time: 4-6 wks] - 0 $1,361.67
4 HIC-HC48764102 Hubbell Type 5370 Postive Shunt Isolation Module [Lead time: 4-6 wks] - 0 $1,362.45
5 HIC-HC48944001 Hubbell Type 5370 Ground Filter Module [Lead time: 4-6 wks] - 0 $141.82
Hubbell 5370 DC Electronic Overload Relay
50mV Insulated Ammeter Shunts for steel panel mounting

No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 HIC-HC57500012 Hubbell AMMETER SHUNT 30A-50MV [Lead time: 2 wks] - 0 $165.21
2 HIC-HC57500013 Hubbell SHUNT 50A:50MV W/INSULAT BASE [Lead time: 2 wks] - 0 $121.74
3 HIC-HC57500015 Hubbell SHUNT 300A:50MV W/INSULAT BASE [Lead time: 2 wks] - 0 $204.74
4 HIC-HC57500093 Hubbell AMMETER SHUNT, 100AMP 50MV, INSUL BASE [Lead time: 3 wks] - 0 $64.03
5 HIC-HC57500096 Hubbell AMMETER SHUNT 200AMP, 50MV, INSUL BASE [Lead time: stock] - 0 $64.03
6 HIC-HC57500107 Hubbell SHUNT ON INSUL BASE 75A-50MV [Lead time: stock] - 0 $64.03
7 HIC-HC57500109 Hubbell SHUNT 30AMP 50MV INSULATED HA [Lead time: stock] - 0 $64.03
8 HIC-HC57500110 Hubbell SHUNT 125AMP 50MV INSULATED HA [Lead time: stock] - 0 $64.03
9 HIC-HC57500111 Hubbell SHUNT 175AMP 50MV INSULATED HA [Lead time: stock] - 0 $64.03
 
Secure Online Order

 
Secure Online Order
 
16,236 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Hubbell part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Magnet Controls

Magnet Controls
 
   • 4291 Euclid Magnet Controllers
     Varistor Type
   • 4292 Compact Magnet
   • Controller YARDMASTER
   • 4292P Compact Magnet
     Controller YARDMASTER PUP
   • 4295 Euclid Magnet Controller
     Resistor Type Auto Discharge
   • 4296 Euclid Magnet Controller
     Resistor Type Manual
     Discharge
   • 4310 Lifting Magnet Disconnect
     Switch
   • 4320 Lifting Magnet Power
     Supplies
   • Service Bulletins (Publications)
 
Hubbell Euclid Magnet Controllers utilize heavy duty components and circuitry arranged to provide optimum control of your lifting magnet. Full featured NEMA Type 1 or 3R enclosed magnet controllers are available for immediate shipment. Of course, we welcome inquiries for custom applications as well.
DC Devices

DC Devices
 
   • 42264 Type 264 400 AMP
     600 Volt DC Contactor
   • 42700 Type 700 1250 AMP
     1000 Volt DC Contactor
   • 42703 Type 703 5000 AMP
     1000 Volt DC Contactor
   • 42710 Type 710 700 AMP
     1500 Volt DC Contactor Dual
     Two Pole Switch
   • 42711 42712 Type 711/712
     1600 AMP 1500 Volt DC
     Motor Operated Switch
   • 42716 Type 716 1600 AMP
     1500 Volt DC Contactor
   • 42720 Type 720 200 AMP
     600 Volt DC Contactor
 
The latest addition to the Hubbell Industrial Controls family are DC Devices used in solid-state adjustable speed drives, uninterruptable power supplies, fuel cells, crane controls, transit and rail vehicles, gas and oil well drilling equipment, mining machinery, and more. These devices are ideal for a wide range of heavy duty applications.
 
Electronic Components

Electronic Components
 
   • 5330 Electronic Frequency
     Relay
   • 5350 Static In-Line Timer
   • 5360 Arc Suppressor
   • 5370 DC Electronic Overload
     Relay
 
The Bulletin 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection.
 
The Bulletin 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control.
 
The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.
 
The Bulletin 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.
Limit Switches

Limit Switches
 
   • 4220 Euclid Power Limit Switch
   • 4225 Quick Break Power Limit
     Switch
   • Series 54 Geared Rotary
     Limit Switch NEMA 1-12
   • Series 55 Geared Rotary Limit
     Switch NEMA 4, 7, 9
 
Type 4220: D-C Limit Switches are devices that are used to interrupt the main power circuit, setting up a dynamic braking circuit that quickly stops hook travel with a minimum of drift.
 
A-C Limit Switches are similar in construction to D-C Limit Switches. The difference is in operation. A-C Limit Switches disconnect two power lines to the hoist motor which then is stopped by a magnetic brake.
 
Type 4225: Euclid quick break limit switches for hoists are normally closed by the weight of the striking lever. The movement of the lever on its upward travel, when engaged by the hoist hook block on its upward travel, causes the switch to quickly break the circuit to the motor with very little upward movement of the crane hook. The switch is automatically reset by the weight of the striking lever when the hook is lowered.
 
AC/DC Contactors and Relays

AC/DC Contactors and Relays
 
   • 5110 AC Magnetic Contactor
   • 5210 DC Magnetic Contactor
   • 5247 Alternating Relay
   • 5320 Euclid DC Relay
   • Service Bulletins (Publications)
 
Rugged Euclid contactors feature many unique design and engineering advancements that greatly simplify applications, installations and servicing. Over 65 years of experience in design as well as manufacturing has been incorporated into these highly reliable units.
 
DC Relays, Type 5320, general purpose control, voltage sensitive, current, and plugging relays are built to withstand severe service using the latest technology in materials for insulating and high-strength. They are recommended for use on heavy industry dc drives such as cranes and mill auxiliaries.
Master Switch/Drum Controllers

Master Switch/Drum Controllers
 
   • 4211 Mini-Master Switch
   • 4215 Magnet Controller
     Lift/Drop Switches
   • 4216 Cam Operated Master
     Switch
   • 4253 Class 53 Master Switch
   • 4258 Class 58 Drum Switch
   • Service Bulletins (Publications)
 
Type 4211 Mini-Master: The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing. It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications.
 
Type 4216 Mill Master: These master switches are of rugged construction to withstand the rough service encountered on applications in the steel mills, such as crane, coal, and ore bridges, blooming and rolling mill auxiliaries, etc., where either floor or desk mounting is required.
 
Type 4253: Master Switches are used to provide single handle pilot control of hoists, cranes, oven pushers, car movers and other equipment requiring speed steps of wound rotor or direct current motors.
 
Type 4258: Drum Controllers start, stop and change the speed and/or rotating direction of reversible AC and DC electric motors.
 
Magnetic Drum Brakes

Magnetic Drum Brakes
 
   • Class 5010 Type F Magnetic
     Drum Brakes
   • Class 5060 Type AT Adjustable
     Torque Brakes
   • Class 5010 Brake Rectifier
   • Brake Shoes, Linings, Bolts
     and Pins
   • Service Bulletins (Publications)
 
Class 5010 Type F: Magnetic drum brakes are spring set, electrically released, drum type friction brakes which are used with either AC or DC motors, used as holding brakes on DC series motor drives, crane hoists, mill drives, and transfer cars.
 
Class 5060 Type AT: Adjustable torque brakes are dual-purpose, drum-type friction brakes that combine an electrically released, spring-set holding brake with an electrically operated, adjustable torque stopping brake within one brake frame.
 
Class 5010 Brake Rectifier: Converts AC line power to DC for use with a rectifier operated brake. A high speed forcing circuit provides optimum operation of the brake.
LED Bridge Crane Lighting

LED Bridge Crane Lighting
 
LED Bridge Crane Lighting: The HBLC LED Highbay is specifically designed to be used on heavy industrial bridge cranes while utilizing AC or DC input voltage. Custom engineered LED optics provide evenly distributed light for bridge crane operators and others working under the crane for increased visibility and safety.
Pendant Pushbutton Stations

Pendant Pushbutton Stations
 
   • 2040 Euclid PBM Pendant
     Station
   • 2030 Compact Pendant Station
   • 2020 Euclid PBP Pendant
     Station
   • 2015, 2016, 2017 Euclid
     Pendant Station
   • 2001 Euclid HD Steel Pendant
     Station
   • PBC, WPBC and XPBC
     Replacement Parts
 
HD stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
 
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
Power Resistors

Power Resistors
 
   • SSR Type 3003 Power
     Resistor
   • SSR Type 3003 Power
     Resistor Frame
   • SSR Type 3003 Power
     Resistor Metal Cover
   • Euclid Type 3004 K Power
     Resistor
   • HHC Type 3005 Power
     Resistor
 
Hubbell Type SSR Power resistors from 1.3 amps through 101 amps are available, from unassembled to completely assembled in frames with covers. Standard assemblies are pre-engineered for primary or secondary resistance, and are used in typical applications such as motor starting or dynamic braking. Construction elements are stainless steel around a porcelain insulator, manufactured for endurance and reliability.
 
Heavy duty Types K1 and HHC resistors also utilize continuous stainless steel elements, with no weld joints where hot spots could develop. These resistors are available in ranges from 38 amps to 695 amps.
 
Pressure Switches

Pressure Switches
 
   • 4269ES 69ES Pressure Switch
     Water Systems
   • 4269W 69W Pressure Switch
     Water Systems
   • 4269J 69J Pressure Switch
     Air Systems
   • 4269H 69H Pressure Switch
     Air Systems
   • 4269SA 69 Pressure Switch
     Special Application
 
Hubbell pressure switches provide automatic control for air or water systems such as compressors, dry sprinkler systems, and well pumps or pumping systems. Thousands of variations are available to provide maximum flexibility at minimum cost.
Speed Switches

Speed Switches
 
   • 2200 Speed Switch Type PR
   • 2210 Speed Switch Type C
   • 2220 Speed Switch Type F
   • 2243 Speed Switch Type D
   • 2260 Speed Switch Type E
   • 2310 Speed Switch
     Non-contact
 
Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.
Radio Control Products

Radio Control Products
 
A typical radio remote control system consists of a portable transmitter carried by the operator, and a receiver installed on the crane, the locomotive, or other remote machinery. Each system operates on a licensed frequency in the 72 to 76 MHz or the 450 to 470 MHz bands, requiring the user to have an FCC license for the transmitter.
Disconnect Switches

Disconnect Switches
 
   • 4245 Euclid Manual-Magnetic
     Disconnect Switch
   • 4310 Lifting Magnet
     Disconnect Switch
   • 5140 Fused And Non-Fused
     Disconnect Switch
 
Type 4245: The Manual-Magnetic Disconnect Switches are combinations manually and magnetically operated contactors enclosed in a NEMA Type wall-mounted enclosure.
 
The contactors for the disconnect switches are the same as the contactors used on Euclid's crane and mill type magnetic controllers. Silver faced contacts are standard.
 
Type 5410: Fused Disconnect - Rated 30amp-200amp. UL Listed.
 
 
Line-Arc AC and DC Contactors

Line-Arc AC and DC Contactors
 
   • 7004 Type M Line-Arc DC
     Contactors
   • 8503 Type M Line-Arc AC
     Contactors
 
Class 7004 Type M Line-Arc® DC Contactors: Extremely rugged, mill duty DC contactors. Built of the highest-grade materials and tested to the toughest duty standards, Type M contactors feature the LINE-ARC method of arc extinction for the longer tip life. The Type M also features steel pan mounting and readily accessible power and control terminations.
 
Class 8503 Type M Line-Arc® AC Contactors: AC version of our Class 7004 Type M contactor. Ideally suited to control AC mill motors, these contactors are designed especially for heavy industry AC drives, such as cranes and mill auxiliaries. Furnished with a DC operating coil, rectifier blocks are available to supply power for several contactors.
 
Lifting Magnet Controllers

Lifting Magnet Controllers
 
  • Class 6815 Type A Lifting
    Magnet Controllers
 
  • Class 6815 Type M
    Magnet Controllers
 
  • Class 6815 Type MF Magnet
    Controllers with Fanning
    Control
 
  • Class 6815 Type MG1 Lever
    Lift-Drop Master Switch
 
   • Service Bulletins (Publications)
Power Limit Switches

Youngstown Power Limit Switches
 
   • 6170 Youngstown Power
     Limit Switches for AC and
     DC Cranes
   • 6715 Tab-Weld Resistors
   • Service Bulletins (Publications)
 
This OSHA-required switch limits crane hoist over-travel in the hoisting direction. It is operated by the crane hoist hook block and directly interrupts the hoist motor current. EC&M created the first power limit switches used on cranes to help provide the highest level of crane safety. Youngstowns feature an automatic gravity reset mechanism, sealed bearings, and right- or left-hand operating arms.
Replacement Parts

Replacement Parts and Modification Kits
 
   • DC Coil
   • Replacement Parts Kits
   • Type MX11 Electrical Interlocks
   • Type AI1 Arc Suppressor
   • Types MM1, MM2, MM3, MM4,
     MM5 Mechanical Interlocks
   • Types KX3, KX4, KX5 Contact
     Kits
   • Type ML1, ML2, ML3 Lug Kits
   • Types MT1, MT2, MT3, MT4,
     MT5 Tie Bar Kit
   • Pneumatic Timer Kit
   • Type K DC Relays
   • Type ST DC Static Timer
   • Type SSI DC Acceleration
     Module
   • 9055 Magnetic Current
     Overload Relays
 
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com   Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985